The main attribute of the LDPE plastics is that they are very lightweight, thing and flexible yet have a substantial amount of strength that can bear a significant amount of weight and hence are used for making carry bags. These materials cannot be recycled but the products made from LDPE can be reused if they are not contaminated. Now, when we speak of testing, rigid packaging is something that needs extra care. Rigid packaging consists chiefly of hard plastic jars and bottles, aerosol bottles, aluminium bottles, glass jars and more. Even amongst these, rigid plastics make up a large share of packaging and containers. They are used in the food industry, the pharmaceuticals, as well as for a wide range of other products, such as cosmetics or stationery. Rigid packaging often comes in multiple parts – the caps and containers are separately manufactured. The quality control of components in pharmaceutical premises starts at the receiving stage. Being a manufacturer of packaging products, if you are looking for a high-quality testing machine that is used to measure the bursting strength of the thermoplastic films, then Bursting Strength Tester is the best device for you.
Paper and packaging testing instruments are vastly used in a variety of industries where paper and paper products are used. There are many industries that are involved in dealing with paper and paper products. Along with that there are packaging industries, printing and publications industries, news paper industries and so forth. The products that manufactured in these products are further used by many different industrial and domestic applications for a variety of purposes. According to the application, there are different requirements for different products when they are being used. One of the most important usages of paper products is in the packaging industries. The paper products are used for packaging and wrapping of a vast variety of products and provide protection to them from the potential threats from the external factors.
Adhesion Tester are designed to measure the bond strength of a coating to a substrate. Leak tester is designed for airproof test of foodstuff, pharmaceuticals, daily chemistry and other industries. Click the launch button below to access a list of submissions for which FDA issued a favorable opinion on the suitability of a specific process for producing post-consumer recycled plastic to be used in the manufacturing of food-contact articles. FMI delivers personalised research services by deploying a broad spectrum of research databases, resources, and methodologies. We offer customised research reports for various industry verticals and regions. As a result of the increasing use of plastics and/or plastic-coated materials, problems arise through the loading and unloading of these insulating materials. One supplier – complete innovative solutions for your laboratory requirements. Made with 100% recycled water bottles and 100% recyclable through PET recycle chain. And with materials experts around the globe, we’re able to source materials that support your brand image and commitment to sustainability.
The machines last long and you seldom have to look for any kind of major repair work. These relatively simple test methods typically evaluate a narrow aspect of an innovation or a package component on recycling. For example, a screening test might evaluate how well a closure or label floats in water, or measure discoloration in PET flake from an extrusion or injection molding heat history. Many of these tests use commonly available equipment and can be employed in a variety of laboratories. Before the test, preset the heat seal temperature, pressure and dwell time value, place the specimen in between the upper and lower jaws, and then press start button. Packages can degrade with exposure to temperature, humidity, time, sterilization (steam, radiation, gas, etc.), sunlight, and other environmental factors. For some types of packaging, it is common to test for possible corrosion of metals, polymer degradation, and weather testing of polymers.
Whether it is a single item or a set of instruments or tools you want to protect and store, rose plastic has the packaging solution and bespoke foam solution to keep your instruments safe, secure and organised. SPS has been providing complete solutions for the analytical, biological, industrial / meterialographic, pharmaceutical, coal and construction industries since 1987. Feedback from partner companies has also allowed us to see other features that are important on the market. The friction characteristics of the film are one example of this, so that it could be more easily used on industrial packaging lines,” Ropponen says. Wherever you need support optimizing product and process quality throughout the product lifecycle, LIGHTHOUSE experts are available for you. The nondestructive nature of the analysis allows permeation monitoring of a single sample over time resulting in a very accurate determination of permeation rates. Regulatory guidance explicitly states that containers closed under vacuum should be checked for the maintenance of a vacuum and LIGHTHOUSE headspace technology can make direct nondestructive measurements of vacuum throughout the entire product lifecycle. LIGHTHOUSE has developed deep expertise in CCI and can support your testing activities in a variety of ways. Application Scientists are there to help perform CCI test method development, support with science-based studies, and even can come on-site for critical troubleshooting analysis. Once you are ready to submit samples please make sure to include a completedSample Submission Form.
FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420. C640 Thickness Tester is a high precision mechanical contact method thickness tester, which can be used for thickness measurement of films, sheeting, paper, corrugated paperboard, textiles, non-woven fabrics, and solid insulation materials, etc. In case of testing vacuum leakage, the container, with the product is put in a vacuum sealed chamber and the pressure inside the chamber is dropped. If improperly manufactured, the walls of the packaging or the region of the seal will begin to leak. The slant leakage test checks different orientations of the package for leakage. Leakage tests allow manufacturers to see if the container can hold the product under different pressures or under different orientation. It is one of the important considerations in packaging material testing methods.
The best laboratory testing device which is used to measure the bursting strength of the papers and packaging products is Bursting Strength Tester. The machine is designed and manufactured as per the standards that are introduced by various standardization authorities such as ASTM, ISO, and many more. To perform the bursting test with the testing machine, take a circular shape of corrugated board sample according to the size of the diaphragm of the instrument. Now place the device on the rubber diaphragm and apply sufficient amount of pressure gradually on the sample until the sample burst. Our polymer scientists apply the most appropriate chemical tests to get the data you need to understand your product’s quality and performance. With expertise in polymer formulation support, our experts can support your product development, competitor polymer material deformulation, comparative composition analysis of blends and regulatory submission data requirements. Quality control of polymer raw materials and finished, formulated, products can be achieved through a wide range of chemical tests and techniques. There many other forms of plastics that can be found to be used in different applications such as nylon resin, Bakelite and so forth. If the manufacturers want to ensure that the best quality products are delivered to the customers, they need to ensure that they test quality of the plastic materials with the help of best precision plastic testing instruments.
Tyvek® has been known to provide superior microbial barrier under the most rigorous, highly contaminated conditions. Tyvek® is made of continuous, randomly oriented high-density polyethylene filaments. This unique structure gives Tyvek® greater resistance to microbial penetration than other packaging materials. Yes, in our packaging material testing lab, food-grade testing is conducted on the packaging materials that come directly in contact with the food item. This ensures that no toxicity transfers from the material to the food, and the item remains safe for consumption until it gets delivered. We have highly qualified team of professionals which is passionate about achieving the perfection in manufacturing of the machine.